Wave Soldering Machine JT
JT Wave Soldering System
- Wave Soldering Machine JT Closed loop with inverter control system to keep the stability and accuracy of the conveyor speed.
- The assistant pressure device nearby the entrance to prevent the PCB from sipping.
- Wave Soldering Machine JT Spray nozzle driving by stepping motor is如make sure the coating uniformly.
- Module design of spray fluxer system and the design of nozzle always be perpendicular to rail, which can make sure the flux penetrates PCB easily.
- Forced air cooling system to attain the cold-down slope as per lead-free required;
- Conveyor angle can easily be adjusted by manwal.
- Standard with hot ait heating for preheating zones.
- Module design suitable for SMT & THT component soldering.
- Exhaust adopt centrifugal fan with double filters to avoid any flux drop to PCB.
- The level of flux container is controlled by non-contact sensors to ensure no Corrision and longer life.
- Flux spray nozzle with self-cleaning system.
- Standard with air knives to prevent flux expand to preheat zone.
- Wave height control adopted with inverterit can be set individually.
- 1/4HP high power mechanical pump to meet the wave as high as 15mm.
- Light & Sound alarm. Emergency 5top and aver-load protection.
Hot Air Preheat
Solder Pot & Cooling
| Model NO | SE-350 -V2 | SE-450 -V2 | ||
| Dimensions (L*W*H) MM | 4445*1582*1735 mm | 4445*1582*1735 mm | ||
| Weight | Approx. 2000 KG | Approx. 2000 KG | ||
| Source Power | AC 380V3 Φ 5W 50/60Hz ( Option: AC 220V 3 Φ 50/60Hz) | |||
| Operating Power | Operating Power 8.2KW | |||
| Preheating Time | <15 Min | |||
| Temperature Range | Room Temperature-280°C | |||
| PCB Width | 50~350mm | 50~450mm | ||
| PCB Clearance | 120mm/ 25mm top 120mm / bottom 25mm | |||
| Conveyor Direction | L to R (Option : R to L) | |||
| Conveyor Height | 750±20mm (Entrance) | |||
| Conveyor Speed | 300-1800mm/min | |||
| Device Layout | ||||
| Heating Zones | 3 Bottom Hot Air Preheating Zones | |||
| Temp Control Mode | PID + SSR | |||
| Control System | PC + PLC | |||
| Spray System | Internal Stepping Motor Spray | |||
| Conveyor Finger | Heavy Duty Double – Hook Finger Claw | |||
| Pot Capacity | 480KG | 550KG | ||
| Pot Operating Mode | Mechanical | |||
| Pot Material | Cast Iron + Enamel Processing | |||
| Cooling Method | Forced Air Cooling | |||
Reviews
There are no reviews yet.