Goot RX802AS Soldering Station
Goot RX802AS Soldering Station | High-performance, super-fast heating (6sec)
- Temperature setting range: 122 – 104°F (50 – 450°C)
- Slide type allows for replacement without hot soldering iron tips Make work easier.
- After turning on and off, it will reach the set temperature in about 6 seconds.
- Even after continuous work, the temperature will be almost uncomfortable.
- Iron plated thickness for corrosion resistance of lead free solders.
- Patented insulated construction ensures long hours of work.
Integrated into the tip, controlled by high sensitivity sensor. Even during continuous operation the tip temperature remains stable with minimal heat loss. Perfect for working with high melting point lead-free solders
Reduced Grip Heat
Patented thermal-insulation grip permits comfortable and safe work.
Excellent Heat Recovery (PAT.)
There is almost no temperature fluctuation during continuous operation. Good for lead-free soldering
Reduced Grip Heat (PAT.)
Patented thermal-insulation grip permits comfortable and safe work.
Tip Replacement without Tools (PAT.)
Slide-change tip. Easy to replace a hot tip without any other tools.
Fastest in Its Class
Reaches set temperature in just 6 seconds after turning power on.
Superior heat recovery
Built-in high-powered heater (72W) capable of delivering enough power to maintain stable tip temperatures, even under different soldering work conditions. Minimal heat loss means the user doesn’t have to set the station at a higher set temperature. Capable of being set at lower temperatures, therefore decreasing tip degeneration when soldering with high melting point lead-free solder.
Superior sleep function (Patented)
Automatic switch off when inactive for a preset period of time. This is easier on the tips than switching the unit OFF. This unit’s sleep function can be programmed to activate at preferred inactive time periods, or can be programmed to go into sleep mode at a certain drop in tip temperature, therefore applicable to a variety of work conditions. Further, before sleep mode activates, the sleep lamp flashes, warning the user that the unit is about to enter sleep mode. Bringing the tool out of the Sleep Mode is as easy as wiping the tip on a sponge to clean the tip.
Thick iron coating
All RX-80HRT tips have a thick iron coating. For example, the thickness of the B-type iron coating is 0.5mm or above, while the thickness of tips in competitor irons are between 0.25mm and 0.3mm. More thickness assures longer tip life.
The Goot RX-802AS is an anti-static easy to use Soldering Station with fast response time. With a new sensor integrated into the heater, the 72W heat capacity allows faster temperature recovery during heavy soldering, reducing the reaction time even at lower temperature settings. Stability during heavy soldering enables low temperature soldering and reduces the risk of thermal shock to sensitive electronic parts.
Fastest in it’s class: (Reaches tip temperature in 6 seconds).
Easy-change tip
One-Step-Slide tip can be changed while the tips remain hot. New tip can be inserted without danger of burns because the tip does not heat until the operator pushes any button on the control unit. Six seconds after pushing any button the unit is ready for full operation.
| Model | RX-802AS |
| Voltage | 110V,120V,130V,220V,230V,240V AC 50/60Hz |
| Power Consumption | 80W |
| Power Cord Length | 1.2m |
| Temperature Setting Range | 50–450°C |
| Ripple temperature | ±5˚C (unloaded) |
| Insulation Resistance | Over 100MΩ (500V DC) |
| Accessories | Iron Unit (RX-80GAS) – Soldering Iron Stand (ST-22) |
|
Control Unit |
|
| Output Voltage | 24V AC |
| Dimensions | 115(W) × 98(H) × 146(D)mm |
| Weight | 1.8kg |
|
Soldering Iron |
|
| Voltage / Consumption | 24V AC / 72W |
| Ground Resistance | Less than 2Ω |
| Leak Voltage | Less than 2mV |
| Heater | Nichrome heater |
| Cord Length | 1.2m |
| Length | 158mm (with RX-80HRT-MB) |
| Weight | 28g (with RX-80HRT-MB) |
Reviews
There are no reviews yet.