Boards Destacker for PCB
Vanstron – Bare Boards Destacker for PCB
This unit is design for loading the bare boards onto the SMT line. Unique separation cams take one PCB from the bottom of the boards stacked, and softly lowering it on the ESD belts to transfer to downstream machine.
Application
- boards Destacker for PCB unit is design for loading the bare boards onto the SMT line and By-pass and destacker mode are selectable in the software.
- Thickness 0.6 mm PCB available to be handled.
- Pre-signal alarm for PCB lower stack heights.
- Use the friendly touch screen panel.
| Model | DL-350 |
| Machine dimensions | 650*885*1250 |
| Weight | 150KG |
| PCB size | 50-500MM (L)
50MM-460MM (W) |
| PCB thickness | 0.6mm-3.5mm |
Bare boards Destacker for PCB
Mitsubishi PLC program control.
By-pass and destacker mode are selectable in the software.
Shortest loading cycle time for PCB.
Thickness 0.6 mm PCB available to be handled.
Uninterrupted PCB charging.
Pre-signal alarm for PCB lower stack heights.
Use the friendly touch screen panel.
Smooth and parallel width adjustment by crank wheel (Optional: motorized).
Interlock for all door open to improvement highest safety operation.
SMEMA compatible.
| Transfer heights | 900mm+/-50mm |
| Transfer direction | Left to right |
| Operation side | Front of machine |
| Fixed rail | Front of machine |
| Interface | SMEMA |
| PCB working cycle time | 3s-7s ( adjustable) |
| Conveyor belts | ESD flat belt |
| PCB edge support | 4mm |
| Components clearance | 20mm below and above |
| PCB thickness available | 0.6mm-3.5mm |
| PCB stack heights | 240mm / specify |
| Air supply | 4-6 bar |
| Safety | CE certificates |
| Control | PLC |
| Voltage | 220V/ 110V , single phase, 50-60Hz |
Reviews
There are no reviews yet.